一种用于数字助听器的WOLA滤波器组的设计准则

针对WOLA(weighted overlap-add)滤波器组在数字助听器多通道处理中的应用,本文提出了一个满足该领域要求的具体的设计准则。根据这一准则,可用窗函数法进行滤波器设计,并把问题简化为对窗长度的选取。对线性扫频信号和语音信号多通道放大两种情况进行了仿真,结果表明,适当选取窗长度,滤波器组输出信号将符合要求并且无混迭。     

金属切屑塑性流动的稳定性

对金属正交切削过程中切屑形成机制和材料塑性流动行为进行实验研究和理论分析. 通过对4 种常用金属材料正交切削过程的实验研究和切屑形貌的微观观察,确定了连续切屑转变成锯齿切屑的临界速度. 结果表明该临界速度与材料性能相关. 在实验观察基础上,提出描述材料正交切削过程的二维分析模型. 该模型假设切屑形成区为包括主剪切区和次剪切区的一个平行四边形. 载荷有主剪切区中的剪应力和次剪切区中的正压力;通过量纲分析得到描述材料正交切削过程的无量纲主控参数和无量纲形式的基本控制方程;应用线性稳定性分析方法建立平面应变状态下评价材料塑性流动稳定性的普遍准则;求得切屑形成区内材料塑性变形的速度和应力近似解. 讨论切屑形成、形貌转变以及相关的塑性失稳机制. 分析结果表明, 表征材料惯性与阻尼之比的无量纲参数— 雷诺数可以作为主控参数描述金属切削过程以及切屑材料塑性流动的稳定性.      

Stress and strain fields in rotating elastic/plastic annular disks of pressure-dependent material

The Drucker–Prager yield criterion is used in conjunction with its associated flow rule to find the elastic/plastic stress and strain distributions within the rotating annular disks under plane stress conditions. The main distinguished feature of the model, as compared to typical models used for analysis of disks, is that the material is plastically compressible. Using an approach proposed elsewhere, the solution for strain rates is reduced to one nonlinear ordinary differential equation and two linear ordinary differential equations. These equations can be solved one by one, which significantly simplifies the numerical treatment and increases the accuracy of solution.     

无穷多目标优化的Geoffrion真有效性及其在鲁棒优化中的应用

在多目标优化中,Pareto有效性体现了目标之间的妥协与补偿,而Geoffrion真有效性能保证补偿是有界的.本文对有无穷多个目标的优化问题引入了真有效性,完整保留了Geoffrion的结构.基于一族锥,揭示了Geoffrion真有效性的特点及其与Pareto有效性的区别.并将Geoffrion真有效性的思想用于鲁棒优化,得到了著名的Hurwicz决策准则.     

Investigation on behavior of crack penetration/deflection at interfaces in intelligent coating system

Based on the three-phase model, the propagation behavior of a matrix crack in an intelligent coating system is investigated by an energy criterion. The effect of the elastic mismatch parameters and the thickness of the interface layer on the ratio of the energy release rate for infinitesimal deflected and penetrated crack is evaluated with the finite element method. The results show that the ratio of the energy release rates strongly depends on the elastic mismatch α1between the substrate and the driving layer.It also strongly depends on the elastic mismatch α2between the driving layer and the sensing layer for a thinner driving layer when a primary crack reaches an interface between the substrate and the driving layer. Moreover, with the increase in the thickness of the driving layer, the dependence on α2gradually decreases. The experimental observation on aluminum alloys monitored with intelligent coating shows that the established model can better explain the behavior of matrix crack penetration and can be used in optimization design of intelligent coating.     

Modified Burzynski criterion with non-associated flow rule for anisotropic asymmetric metals in plane stress problems

The Burzynski criterion is developed for anisotropic asymmetric metals with the non-associated flow rule (NAFR) for plane stress problems. The presented pressure depending on the yield criterion can be calibrated with ten experimental data, i.e., the tensile yield stresses at 0°, 45°, and 90°, the compressive yield stresses at 0°, 15°, 30°, 45°, 75°, and 90° from the rolling direction, and the biaxial tensile yield stress. The corresponding pressure independent plastic potential function can be calibrated with six experimental data, i.e., the tensile R-values at 0°, 15°, 45°, 75°, and 90° from the rolling direction and the tensile biaxial R-value. The downhill simplex method is used to solve these ten and six high nonlinear equations for the yield and plastic potential functions, re- spectively. The results show that the presented new criterion is appropriate for anisotropic asymmetric metals.     

THE ZONAL DISINTEGRATION MECHANISM OF SURROUNDING ROCK AROUND DEEP SPHERICAL TUNNELS UNDER HYDROSTATIC PRESSURE CONDITION: A NON-EUCLIDEAN CONTINUUM DAMAGE MODEL

A new non-Euclidean continuum damage model is proposed to investigate the zonal disintegration phenomenon of the surrounding rocks around deep spherical tunnels under hydrostatic pressure condition as well as the total elastic stress field distributions.The elastic stress fields of the surrounding rocks around deep spherical tunnels under hydrostatic pressure condition are obtained.If the elastic stresses of the surrounding rocks satisfy the strength criterion of the deep rock masses,the number,size and location of fractured and nonfractured zones are determined.The efect of physico-mechanical parameters of the surrounding rocks on the zonal disintegration phenomenon is studied and numerical computation is carried out.It is found from numerical results that the number,size and location of fractured and non-fractured zones are sensitive to the physico-mechanical parameters of the surrounding rocks.     

固体材料脆性断裂的多尺度时空模型(英文)

通过实例分析了动态断裂过程所固有的典型动态作用,基于断裂孵化时间理论的时空结构方法提出了固体材料断裂的统一解释.此外,还提出了计及尺度效应的广义断裂模型,该模型可以用于预测准脆性非均质材料的多尺度断裂,并证明此模型基于实验室尺度的实验数据可以预测更高尺度(真实尺度)的宏观断裂.     

再论Mobius变换中的n阶循环群判据

用二阶方阵的幂运算取代Mobius变换的迭代运算,导出了Mobius变换为n阶循环群的判据,并对判据进行了简化,最后给出了它们的应用.     

Tension–torsion fracture experiments – Part II: Simulations with the extended Gurson model and a ductile fracture criterion based on plastic strain

An extension of the Gurson model that incorporates damage development in shear is used to simulate the tension–torsion test fracture data presented in Faleskog and Barsoum (2013) (Part I) for two steels, Weldox 420 and 960. Two parameters characterize damage in the constitutive model: the effective void volume fraction and a shear damage coefficient. For each of the steels, the initial effective void volume fraction is calibrated against data for fracture of notched round tensile bars and the shear damage coefficient is calibrated against fracture in shear. The calibrated constitutive model reproduces the full range of data in the tension–torsion tests thereby providing a convincing demonstration of the effectiveness of the extended Gurson model. The model reinforces the experiments by highlighting that for ductile alloys the effective plastic strain at fracture cannot be based solely on stress triaxiality. For nominally isotropic alloys, a ductile fracture criterion is proposed for engineering purposes that depends on stress triaxiality and a second stress invariant that discriminates between axisymmetric stressing and shear dominated stressing.